Car Breakdown Recovery and Towing Service Near Me in Camden Town, Regent’s Park NW1

Call Us Now: 07453 317 223

Get Professional Car Recovery and Towing Services Near Me in Camden Town, Regent’s Park NW1

A dead battery is one of the problems that car owners face. The most frustrating part is that it usually occurs when it is least expected. Problems associated with a dead battery can happen to anyone. Apart from calling a car recovery in Camden Town, Regent’s Park NW1 for help, here is how you can use another car to jumpstart your car battery.

Park next to another car

Park next to a car that is working in a way that your car faces the other car. The two cars must be apart from each other by at least 18 inches. If your car uses an automatic transmission, put it in a car mode. For manual transmission, it must be in a neutral mode. The brakes must also be set on both cars so that they won’t move.

Turn off both cars

The engines of the two cars must be switched off and the keys removed. Place the jumper cables on the ground and ensure that they do not touch each other. Then, open your car’s hood and locate the battery. Identify the positive and negative terminals of your car battery.

Reliable and professional vehicle recovery in Regent’s Park, NW1 – White Recovery is here to help!

Connect a red clamp to the positive terminal of the dead battery

The next thing to do is to connect the red clamp to the positive terminal f the dead battery. A solid connection must be established towards the terminal; this is why you may need to wiggle to clamps.

Connect the other red clamp to the positive terminal of the good battery

Get the other red clamp of the jumper cable and connect it to the positive terminal of the working battery.

Connect the partnered black clamp to the negative terminal of the working battery

Next, connect the negative clamp (colored black) to the negative terminal of the working battery.

Hook the other partnered black clamp to the clean nut of the engine block

Attach the other clamp into a metal portion of the dead car (this portion must be unpainted; for example the clean and shiny bolt or nut in the engine block of the car). This will help ensure safety when jumpstarting.

Turn on the engine of the working car

Turn on the engine of the working car and wait for about a minute. You may need to leave the car to run for about two minutes for it to work; this depends on the age of the battery and how long it has been dead.

Turn on the dead vehicle

The dead vehicle should work at this stage. If it does not work, wait for the working vehicle to charge for some minutes and restart the engine. Rev the engine of the working vehicle if the dead vehicle doesn’t turn on.

Disconnect the jumper cables

If the vehicle is already on, you need to disconnect the jumper cables by removing the black jumper cables before the red jumper cables. None of the cables must touch each other while they are still attached to the vehicle.

Recharge the battery by going for a short drive

Allow the battery to charge by going on a short drive. This will give the alternator an opportunity to charge the battery and prevent your car battery from running flat when the engine is turned off.

Starting a car with a dead battery with another car is an easy process. However, if the aforementioned steps do not work for you, then you need to seek for professional help. Here’s where White Recovery’s car breakdown recovery service in Camden Town, Regent’s Park NW1 comes in. contact us today to learn more about our 24-hour car recovery in Camden Town, Regent’s Park NW1.