Car Breakdown Recovery & Towing Service Near Me in Cricklewood, Neasden NW2

Call Us Now: 07453 317 223

24/7 Professional Car Recovery and Towing Services Near Me in Cricklewood, Neasden NW2

One of the most undesirable situations that car users experience is a car breakdown caused by a dead battery. The good news is that you can jumpstart your battery without the help of a car recovery company in Cricklewood, Neasden NW2. In this article, we will take a look at how you can jumpstart a dead battery without another vehicle. This skill will come in handy if your car battery dies while you’re on a deserted road.

Push Starting

This method works for cars with manual transmission. Push your car until it starts gaining some momentum. This will work if you switch your car’s ignition on putting the car into second gear. You need someone to assist you in pushing the car until it starts gaining momentum while you discharge the clutch pedal in the process. Once the clutch pedal is discharged, the transmission will take over and this will power the engine. As stated earlier, this only works for cars with manual transmission. The tips below will work for cars with automatic transmission.

Jump Box

A jump box is one of the best investments that you can make as a car user. You can also get a jump start battery pack; this gives your car enough energy that will jump start it whenever the battery is low or dead. All you need to do is to connect the jump box or jump start battery pack to your car’s battery through the cables. This will supply your car with enough energy to jump start your car within some minutes.

Booster Pack

You can also jumpstart your car anytime, even if the battery is dead, with the help of a booster pack. The first thing you need to do for this to work is to switch off your car by turning off the ignition. Lift up the hood to locate the battery. You will see it with two metal posts that are covered with a black and red rubber stopper. Ensure that the black and red clamps of the booster pack do not touch any metal conductor or each other; this can damage your battery or the pack thereby causing a severe explosion.

Once you locate the battery, connect it to the battery pack. Switch off the battery pack, and then connect the positive (+) red connector to the positive (+) metal post. Next, connect a negative (-) black clamp to a grounding point (you can use any metal component of your car for this purpose). Switch on the booster pack and try to start your car.

Turn on the ignition in 5 to 6-second spurts. Don’t push it further than this in order not to damage your car and the battery pack. Switch off the booster pack and detach the black and red clamps. Ensure you detach the black clamp first.

Recharge your battery b driving it around for at least 20 minutes. You should also charge the booster pack once you reach your destination.

Conclusion

It is important to be safety conscious when jumpstarting your car without another car. Do not make the wrong connection or disconnection to prevent burning your battery and damaging your car. You should also ensure that your car shoulder is in “neutral” if you’re jumpstarting a vehicle with automatic transmission; doing so will prevent your car from hurtling on its own.

If you need help with your car battery or if you break down in the middle of nowhere as a result of dead battery, White Recovery’s car recovery service in Cricklewood, Neasden NW2 will help get you back on the road as quickly as possible. Get in touch with us today to learn more about our car breakdown recovery service in Cricklewood, Neasden NW2.